This is a fun ornamental tree set that can be used with or without tea lights to accentuate the trees. The trees nest together like screws using the spiral of the trees. They can be printed as a single set (nested).

100% printed - no hardware, fasteners, or adhesives required. No support required.

Print Settings

The trees are made of 0.8mm walls so they will print fast and easy. There should be no infill at all and I recommend the following settings:

Material = PLA (any material should work) Nozzle = 0.4mm Layer height = 0.2mm Line width = 0.4mm Wall count = minimum 2 (0.8mm) Top and Bottom Layer Count = minimum 3 Infill = 0% Ironing = No Brim = No Support = No Wall Generator = Arachne Detect Thin Lines = Yes Wall Seams = Random