UPDATED: 2025-05-13 - New improved geometry making it easier to use, holds lids better and is stronger.

This is a very simple but effective alternative to storing cooking pot lids. The lids are hung in parallel to create a “stacked” style of storage.

It is important to note that this hanging system requires the pot lids to have an inside lip which I believe all glass and many metal lids have.

The Hanger is very strong and will easily handle the weight of 4 lids. I would be happy to make it in other sizes if anyone wants it bigger or smaller.

100% printed - no hardware, fasteners, or adhesives required. No additional support is required.

Print Settings

For the best results, I suggest the following: Material = I recommend PETG but any material should work.

Nozzle = 0.4mm Layer Height = 0.2mm Line Width = 0.4mm Wall Count = 4 (1.6mm) Top and Bottom Layer Count = 5 Detect Thin Walls = ON Wall Generator = Arachne Infill = 40% (Cubic) Ironing = Not required Support = None required Print orientation = As per the STL/3MF files.

Visit my blog for more details and other designs: https://www.logicalplanet.com/

Revisions and Updates I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.