tracking pixel
Paul B

LP Flask 500ml

by
logicalplanet
Follow
Follow
Remix Model
logicalplanet
logicalplanet
|
Image 1 of 4
LP Flask 500ml 3d model
logicalplanet
logicalplanet
|
Image 1 of 4
LP Flask 500ml 3d model
2D
3D
Makes
LP Flask 500ml 3d model
LP Flask 500ml 3d model
LP Flask 500ml 3d model
LP Flask 500ml 3d model
This model is restricted by licensing terms. 

This is a printable 500ml bottle or flask. It should not be used for human food or beverage consumption due to the inherent problems with keeping FDM-printed designs clean. But it does work well for non-consumable liquids. Please check out the video for more information.

100% printed - no hardware, fasteners, or adhesives required. No additional support is required.

Printing ---------------------------------- Material: I choose to use PETG.

My Setup: Nozzle = 0.4mm

My Settings: Layer height = 0.2mm Line width = 0.4mm Wall count = 4 (1.6mm) Infill = 100% Flow = 104% (flow slightly above 100% improved the waterproofing)

Support: Designed to print without support.

Commercial Licensing is available through my logicalplanet Memberships here on Thangs. I will customize and provide commercial support to members on request.

I am committed to helping everyone get great print results to the extent I can so please contact me if you are having issues I enjoy trying to help resolve those challenges. I welcome requests, suggestions and ideas to help make this and all my products better. Please send me a message any time.

See my blog for more details and other product info… https://www.logicalplanet.com/


23 Likes35 DownloadsFebruary 21, 2024


23 Likes35 DownloadsFebruary 21, 2024
This model is restricted by licensing terms.