tracking pixel
Paul B

Key Blocks

by
logicalplanet
Follow
Follow
Remix Model
logicalplanet
logicalplanet
|
Image 7 of 7
Key Blocks 3d model
logicalplanet
logicalplanet
|
Image 7 of 7
Key Blocks 3d model
2D
3D
Makes
Key Blocks 3d model
Key Blocks 3d model
Key Blocks 3d model
Key Blocks 3d model
Key Blocks 3d model
Key Blocks 3d model
Key Blocks 3d model
This model is restricted by licensing terms. 

This is a snap-together modular key storage and organization system that addresses those keys we all have lying around, lost in coin trays, rattling around in a drawer, or falling into a gap somewhere. Snap these together however suits you and then hang, hook or stand the key holder wherever convenient. Now you know where your spare keys are and can see if one is missing.

The key blocks contain a series of independent ribs which will hold any key inserted but allow it to be removed whenever needed. The grip is designed to hold keys from about 1.4mm to 2.5mm in thickness. If you want it for other sizes let me know and I will make it.

100% printed - no hardware, fasteners, or adhesives required.

Print Settings:

I have tested this design on multiple printers using PETG and PLA. Print settings can vary significantly between users so please note my settings and let me know if you are having difficulty. I am committed to helping everyone get great print results to the extent I can so please contact me if you are having issues.

Material = I recommend PETG but any material should work.
Nozzle = 0.4mm Layer height = 0.2mm Line width = 0.4mm Wall count = 4 (1.6mm) Infill = 40% Ironing = OFF

All parts should be printed standing up without support. The closet hook is a print-in-place hinged hook - the connector is printed upright but the hook itself is lying flat. The loop end has built-in print support.

Commercial Licensing is available through my Thangs Memberships.

I welcome requests, suggestions and ideas to help make this and all my products better. Please send me a message any time.

This is related to my Magnetic Key Hider which you might also be interested in… https://than.gs/m/1109021

See my blog for more details at… https://www.logicalplanet.com/


12 Likes28 DownloadsJuly 26, 2024


12 Likes28 DownloadsJuly 26, 2024
This model is restricted by licensing terms.