Herb Stripper
This is a simple handy kitchen tool for stripping herbs off their stems. Now I know…. you do not need a tool for this, you can just use your fingers. But if you are doing a volume of stems, you will definitely appreciate this tool.
This is a very effective tool for most garden herbs. I love to dry my garden herbs for the winter and this tool makes that a lot easier. This is a print-in-place compliant design that prints easily with no support and is useable right off the print bed. Just be sure to use a food-safe material.
I included a range of hole sizes to hopefully accommodate whatever herbs anyone needs to process. But if you find you need a different size please let me know.
100% printed - no hardware, fasteners, or adhesives required. No support is required.
Print Settings:
Material = Food grade PETG, any material should work.
Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Infill = minimum 40% Cubic
Ironing = Not required
Brim = No
Support = No
See my blog for more details and other product info… https://www.logicalplanet.com/
Herb Stripper
Logical Modular Planters
CollarPod 40 - Poop Bag Holder for Dog Collars - 1.5 Inch Collar - Single Piece TPU - No Assembly
CollarPod 26 - Poop Bag Holder for Dog Collars - 1 Inch Collar - Single Piece TPU - No Assembly
CollarPod 17 - Poop Bag Holder for Dog Collars - 5/8 Inch Collar - Single Piece TPU - No Assembly
BeltPod 40 - Poop Bag Holder for Your Belt - Single Piece TPU - No Assembly
Logical Scraper B - 1 Piece No Screws No Assembly
Logical Scraper A — 2 Piece, No Screws
LGP Self-Watering Tray — Modular Bottom Watering Reservoir for the Logical Grow Platform
LGP Single Cell ThirdTray — Modular Grow Cell for the Logical Grow Platform
LGP Single Cell HalfTray — Modular Grow Cell for the Logical Grow Platform
LGP 2×3 Cells XL HalfTray — Modular Seed Starting Tray for the Logical Grow Platform
LPE25 Clampless Quick Connect
H2 Series Waste Bin
Exhaust Header for Bambu Lab H2 Series Printers
Lazy Susan 120 v3.0
Lazy Susan 160 v3.0
Lazy Susan 200 v3.0
Lazy Susan 240 v3.0
Lazy Susan 280 v3.0
Oh, sorry to hear that. Those symptoms generally suggest over extrusion. I have printed the part on 3 different printers and in both PLA and petg. All without issues. There is a 0.2mm gap between the bridge and the lower surface. If you are printing 0.4mm layer heights that might close up. Also, sorry for stating the obvious, but make sure “supports” is off.
Cool idea, I tried to print this though and the curved plastic rod that keeps the two sides aligned was modeled so tightly that when my printer closed the channel off, it welded the two pieces together and they couldn't close. I tried to break the connection but I ended up bending them instead. I probably need to find better bridge settings but in my slicer, the top of the channel begins printing on the very next layer after the curved rod finishes, which I find odd.