This glove dryer accelerates the glove-drying process by circulating air inside the glove. In my testing, a damp glove that took approximately 12 hours to dry without any air circulation dried in less than 3 hours with air circulation. In addition, the faster drying and air circulation reduced odours in the glove as well.

The glove dryer is snapped together and requires no fasteners or other hardware other than a 6015 blower-style fan. I used a USB-powered model (linked below), but I suspect any 6015 blower fan will work since they are generally standardized in size. If you have 6015 that does not fit, please let me know.

I am in Canada so I used this… https://www.amazon.ca/dp/B07TF644HB

Some USA equivalents appear to be… https://www.amazon.com/WDERAIR-Brushless-Electronic-Equipment-Ventilation/dp/B0DGG6YHRT?ref_=ast_sto_dp&th=1

https://www.amazon.com/gp/product/B0CG1SZ84J/ref=ewc_pr_img_1?smid=A1AV40UDU1XL8S&th=1

Print Settings

I designed this for PLA but I suspect it will work well with PETG as well. The design is intended to be printed with a 0.4mm nozzle and 0.2mm layer height. All required support is included in the design. However, the Palm, which prints upright, may require a bring depending on your printer (I needed a brim to print it reliably).

For the best results, use these settings: Material = PLA Nozzle = 0.4mm Layer Height = 0.2mm Line Width = 0.4mm Wall Count = 4 (1.6mm) Top and Bottom Layer Count = 5 Detect Thin Walls = ON Wall Generator = Arachne Infill = 40% (Cubic) Ironing = Not required Brim = No, except for Palm - add if needed. Support = No, all required support is incorporated into the design. Print orientation = As per the STL/3MF files.

Additional Info Visit my blog for more details and other exciting designs:
https://www.logicalplanet.com/