This is a handy and innovative fold-flat door stop that I can keep in your pocket, drawer, tool kit or just about anywhere.
This print-in-place folding wedge operates in two ways allowing it to accommodate an under-door gap from 8mm to 60mm. It is thin, light and strong making it ideal for any handyman or tradesperson who needs a door wedge with them.
It is a print-in-place design that requires nothing after printing. Simply take it off the build plate and put it to use. Simply fold the two sides together (they are limited to 100° angle) and stand it up under a door. Pull the door onto it and the door is stopped.
I used a 15° angle for the stop which creates a fairly low rise making it easy to wedge under doors. But that slow rise means one side does not cover a very large range - only 8mm to 35mm. So I made it two-sided allowing the second side to carry on with an additional range for holding more doors - 33mm to 60mm.
100% printed - no hardware, fasteners, or adhesives required. No additional support is required.
Print Settings:
Material = I recommend PETG but any material should work.
Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Infill = 100%, minimum 40% Cubic
Ironing = Not required
Brim = No
Support = No
Commercial Licensing is available through my logicalplanet Memberships here on Thangs. I will customize and provide commercial support to members on request.
I am committed to helping everyone get great print results to the extent I can so please contact me if you are having issues I enjoy trying to help resolve those challenges. I welcome requests, suggestions and ideas to help make this and all my products better. Please send me a message any time.
See my blog for more details and other product info… https://www.logicalplanet.com/