tracking pixel
Paul B

Fold-a-Ball LIGHT - A foldable ball that fits in your pocket

by
logicalplanet
Follow
Follow
Remix Model
logicalplanet
logicalplanet
|
Image 7 of 7
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
logicalplanet
logicalplanet
|
Image 7 of 7
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
2D
3D
Makes
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
This model is restricted by licensing terms. 

This is a LIGHT version of 2.5" fold-a-ball. It has one less inner core making the entire ball lighter. This is a ball that folds up and fits in your pocket. It is a fun and entertaining general purpose tennis ball sized folding ball.

It is a print-in-place 1-piece ball that folds into a 12mm thick disc. It can be deployed and collapsed quickly and easily. 100% printed - no hardware, fasteners, or adhesives required. No support is required.

Please note that if you want a more durable ball, see my other version... https://than.gs/m/1172663

Your material selection and slicer settings will determine how durable and strong the printed ball is. I recommend a durable and flexible material like PETG or something stronger. You will want to print with a minimum of 4 walls and 100% infill.

Safety Note: As with any plastic toy, please supervise children and pets while they’re playing with it! While the ball is durable, it’s still 3D-printed, and material could break off.

Free for a limited time. Please collect it, like it and download it now to help support me in the league competitions. Thank you.

Print Settings:

  • Material = I recommend PETG but any material should work.
  • Nozzle = 0.4mm
  • Layer height = 0.2mm
  • Line width = 0.4mm
  • Wall count = 4 (1.6mm)
  • Top and Bottom Layer Count = 5
  • Infill = 100%
  • Ironing = Not required, but can be enabled to improve layer separation after printing
  • Brim = No
  • Support = No

Commercial Licensing is available through my logicalplanet Memberships here on Thangs. I will customize and provide commercial support to members on request.

See my blog for more details and other product info… https://www.logicalplanet.com/


33 Likes84 DownloadsNovember 12, 2024


33 Likes84 DownloadsNovember 12, 2024
This model is restricted by licensing terms.