This is a sleek and minimal eyewear case for your spectacles, eyeglasses or sunglasses. Print and snap together.
The inside dimensions are 155x46x32mm.
2024-11-05: UPDATE - I made a few tweaks to the design to a) improve the inside bridge of the main body, b) improve the lid rotation clearance, and c) flattened the main body slightly so that the case will stand on its own.
100% printed - no hardware, fasteners, or adhesives required. No support is required.
Print Settings:
Material = PLA or PETG (any material should work) Nozzle = 0.4mm Layer height = 0.2mm Line width = 0.4mm Wall count = minimum 2 (0.8mm) Top and Bottom Layer Count = minimum 3 Infill = minimum 15% Ironing = Not required Brim = No, optional if having bed adhesion issues Support = No
Commercial Licensing is available through my logicalplanet Memberships here on Thangs. I will customize and provide commercial support to members on request.
See my blog for more details and other product info… https://www.logicalplanet.com/