This remote control holder has 3 “slots” in it. Two of them are deep and one is less so. The dimensions of the openings for the remote controls are shown in the illustration.

This accessory snaps onto the ClampDock (download separately), allowing you to attach this accessory to a wide range of furniture edges.

100% printed, no hardware, fasteners or adhesives are required.

This download contains the ClampDock Accessory only. You must download the ClampDock separately.

Print Settings

For the best results, I suggest the following: Material = PLA / PETG Nozzle = 0.4mm Layer Height = 0.2mm Line Width = 0.4mm Wall Count = 4 (1.6mm) Top and Bottom Layer Count = 5 Detect Thin Walls = ON Wall Generator = Arachne Infill = 40% (Cubic) Brim = Should not be needed Support = No Print orientation = As per the STL/3MF files.

Related Links

The ClampDock is available here… https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs: https://www.logicalplanet.com/

Revisions and Updates I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.