This is a kitchen utensil/gadget used for cutting a rondelli roll into equal parts rondelli pieces. It's useful for manufacturing accurate slices.

Each slice will have at most 80mm, the internal diameter of this tool is 80mm.

I separated each piece into a 27mm wide piece, for easier printing without supports. Each piece can be manually attached to each other. Each part is produces a 25mm wide rondelli and has a 2mm width for the cutting blade.

I've also included a "cutting" part, which is an optional print, it's useful to cut many slices without using a knife to slice each part.

Print as many "Slicer Part" as you need, to get the desired amount of pieces, I generally use 6 pieces to get equal pieces.

Printing instructions:
Layer height: 0.2mm - 0.4mm (I use a 0.8mm nozzle)
Infill: 5-10%
Walls: 1.6mm (2 walls if using 0.8mm nozzle, 4 if 0.4mm nozzle)
Top/Bottom: 1.2mm
Supports: None

Rondelli Pasta Roll Slicer / Cutter

Rondelli Splicer v6.3mf

This is a cover that will perfectly fit a Eufy Door Sensor, so it can be left outdoors, it is 100% waterproof, you can leave it in the weather, taking rain.

This is a tight fit, I printed it in my K1 with a 0.40mm nozzle.

* Print with 100% walls or 100% infill, I used.
Layer height: 0.2mm or less
Wall width: 1.6mm
Top width: 2mm

Don't forget to print the lid siding up.

Eufy Door Sensor Outdoors Cover

sensor-container.3mf

sensor-lid.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

leonardoshiro

Achievements

Seedling

Rondelli Pasta Roll Slicer / Cutter

Eufy Door Sensor Outdoors Cover