This is a kitchen utensil/gadget used for cutting a rondelli roll into equal parts rondelli pieces. It's useful for manufacturing accurate slices.
Each slice will have at most 80mm, the internal diameter of this tool is 80mm.
I separated each piece into a 27mm wide piece, for easier printing without supports. Each piece can be manually attached to each other. Each part is produces a 25mm wide rondelli and has a 2mm width for the cutting blade.
I've also included a "cutting" part, which is an optional print, it's useful to cut many slices without using a knife to slice each part.
Print as many "Slicer Part" as you need, to get the desired amount of pieces, I generally use 6 pieces to get equal pieces.
Printing instructions: Layer height: 0.2mm - 0.4mm (I use a 0.8mm nozzle) Infill: 5-10% Walls: 1.6mm (2 walls if using 0.8mm nozzle, 4 if 0.4mm nozzle) Top/Bottom: 1.2mm Supports: None