This is a mounting solution for the Mellow Fly D7 controller board.
It can be attached to your printer either by using standard Voron Design DIN rail adapters and M2 self tapping screws, or by screwing/gluing directly to your electronics bay.
The holes for mounting the PCB are meant to hold standard M3 heatset inserts with a 5mm outer diameter.
I personally found M3x10mm machine screws to be the perfect length for attaching the PCB to the mount.

Mount For Mellow D7 (DIN Rail Compatible)

Mellow D7 Mount.stl

This is a quick and printable jig for cutting and sanding 5mm x 50mm rods for Micron Z drive. I found using a bit of tissue paper helps hold the rod in place for sanding a flat.

Jig for 5mm x 50mm rods for Micron Z drive

5mm rod 50mm jig.3mf

This is a clone/recreation of the Teenage Engineering Computer-1 ITX case. 

I have not been able to verify the dimensional accuracy of this compared to the physical Computer-1 case but I have based the dimensions on the Mini-ITX standard and on the dimensions of the fan mounts so it should be roughly correct. 

This is provided for personal use and comes no guarantee of accuracy. 

Computer-1 Clone.dxf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

leclairaaron

Achievements

Seedling

Up and Coming

Mount For Mellow D7 (DIN Rail Compatible)

Jig for 5mm x 50mm rods for Micron Z drive

Computer-1 Clone.dxf