Rafts: No
Supports: No
Resolution: 0.16
Infill: 20

Door_locker_v3.stl

I'm glad to present you with the shelf for the top of your monitor! 

Its legs are adjustable so that it will fit any monitor.

Print Advices:
I'll advise you to print parts in those orientations as it is. Use supports for the screws. Also, use supports for the main body, but be sure to check the “only from the table” checkbox if you don't want to clean it from the inside thread (Threads are printing well without supports).

Enjoy! And don't forget to send me a print in comments ;)

Monitor top shelf

Shelf.stl

A simple little wheel for a mouse/hamster/squirrel/any other small rodents.

Make your pet happy :) 

Print Settings:
- Rafts: No
- Supports: No
- Resolution: 0.2
- Infill: 15%

Hamster/Mouse/Squirrel Wheel

wheel.stl

This is the Gengar Pokemon figure sliced by parts. Also, I uploaded a full model, but I didn't try to print it like this. You will need some supports for the mouth, legs, and hands. Other parts you can print without it. I printed it with 0.16 resolution. Keep in mind, that you will need a model, named “connector” 6 times, and 2 pupils

Tip for the assembling. Take the back first, then connect the legs and arms to it and after that, you can cover it with the front part. You will need glue.

Gengar Pokemon figure

Gengar_one_model.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

labax

Achievements

Seedling

Door_locker_v3.stl

Monitor top shelf

Hamster/Mouse/Squirrel Wheel

Gengar Pokemon figure