A PC4-M6 threaded cap specifically designed to build a durable and efficient dry box for industrial and business use. This user-friendly 3D model is meant to reduce printing times significantly. It incorporates a small section of TPFE tube as a sealing cap, guaranteeing a practical solution for anyone with extra PC4-M6 spare parts. Equip your workspace with this temporary solution, designed to be replaced once you find or create a more permanent answer to your needs.
I created this as I was building up a solution similar to https://www.printables.com/model/146367 but I wanted to be able to seal the interfaces when not being used, while still ensuring the filament did not slip back into the box.
Some practical info for interest on the settings I used (on a Weedo M2) and my results:
- Layer height: 0.15mm (to ensure a practical thread... Higher would be better, lower worse of course)
- Infill density: 10% (likely not too important with the size of this model)
- Print time: 0h17m
- Filament used: 0.578m