Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4166029.

I had a need to keep all my magazines in the safe and range bag organized, together and as compact as possible.   Offered to you is my take on the solution.

Printing with PLA on a Ender 3 on the finest settings took 3+ Hours, but it's strong and the magazines mostly slide in with a good friction fit.

Taurus TX22 Magazine Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4167206.

Another magazine holder, from Tinker-Cad, but I needed to get the magazine profile from "Member73"'s work on https://www.thingiverse.com/thing:2769899

GSG Firefly / Sig Mosquito Magazine Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4167792.

I needed something to organize my magazines, a quick moment in Tinker-Cad and this came out.

CZ 75 B Magazine Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4166102.

I needed something to keep all my magazines tidy in the range bag, so a few minutes in Tinker Cad and I came up with this.  Holds 4 magazines with a friction fit so they are all together if you happen to shoot more than one firearm at the range.

Ruger EC9s, LC9s, LCP II Magazine Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4664854.

Version 3 of the H&K MP5 Magazine loading little .177 Cal (4.5mm) BB's sucks, even with the good magazines that Umarex provides with the H&K MP5 K-PDW. This is a speed-loader for the magazines to drop those 40 little balls into the magazine.

Print at 100% in the orientation provided 3-ish Hrs on Ender 3 High Quality, PLA, clean out the support and ream out the BB hole to ensure easy BB passage and no plastic in your magazine.

Pull Magazine Follower back until locks, place on top of magazine, should be snug. This holds the retaining latch back so the BBs should just fall into the magazine. Lightly shake if you get a BB Jam at the hole. I may make one that has a 40 BB Measure/larger hopper, but as is this cuts loading time down to about 10-20 seconds.

Designed in TinkerCad. You can Tinker it yourself
https://www.tinkercad.com/things/63p5vOr6GbR
<iframe width="560" height="350" src="https://www.tinkercad.com/embed/63p5vOr6GbR?editbtn=1" frameborder="0" marginwidth="0" marginheight="0" scrolling="no"></iframe>

Heckler and Koch MP5 K-PDW BB Magazine SpeedLoader V3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4265811.

Hi Point TS995 Magazine organizer, holds 6 10rd Magazines as compact as possible in your range bag.  It will work with the 20rd Red Ball Magazines, but not as compact as we would like, I will work on that design later.

Hi-Point 9mm Carbine Magazine organizer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1598594.

I needed a way to keep my spare camera batteries in my bag w/o them jumbling around loose.  3D Printing to the rescue!  The included file is meant to hold up-to 4 Nikon EN-EL19 Batteries, ready to print.

Included is the OpenSCAD file that allows you to build strips of these holders, 1 to the max size of your build platform.

Nikon EN-EL19 Spare Battery Holder *CUSTOMIZABLE*

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4742402.

Magazine Wheel holder for the Ruger 10/22 .177 Pellet Rifle, the fit with PLA on Ender 3 is tight, you may want to print at 1% scale up to make it easy to get the magazines out or use Silicon spray to ease the magazines out.


Ruger 10/22 .177 Air Rifle Wheel Magazine Holdr

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4210098.

The Taurus TX22 16rd Magazine's spring retainer is a quick little thing, lost one in a blink of an eye and almost the loss of one...  So here is a replacement, takes only 3 minutes to print a new one.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/8jX2NgVHyJ4

Tarus TX22 16Rd Magazine Spring Retainer

I'm working on a holster for my Umarex Steel Storm BB Gun, but the BB reservoir slides open at the slightest touch, dumping my BBs all over the ground. So a little time in Tinker-cad and 3 iterations I have this, a clip-on retainer that holds the front sight in place and keeps the reservoir closed. Print on end without supports and press-fit as in photos and happy plinking!

Tinkercad Design available:
https://www.tinkercad.com/things/31RvuXaGWw1


SteelStormBBFillHolderV3.stl

BB Drop-in speed-loader for the Umarex Walther PPK/S BB pistol. Print in original orientation or on back with bb-hole up. Slip in the back of the magazine facing up/towards hopper until spring is compressed and drop in BBs until full. Ream magazine holes if printer does not have dimensional accuracy.

Tinker Cad Original Design available.
https://www.tinkercad.com/things/eWTu0N0BhJf

Walther PPK-S Loader V6.stl

Version 3 of the H&K MP5 Magazine loading little .177 Cal (4.5mm) BB's sucks, even with the good magazines that Umarex provides with the H&K MP5 K-PDW. This is a speed-loader for the magazines to drop those 40 little balls into the magazine.

Print at 100% in the orientation provided 3-ish Hrs on Ender 3 High Quality, PLA, clean out the support and ream out the BB hole to ensure easy BB passage and no plastic in your magazine.

Pull Magazine Follower back until locks, place on top of magazine, should be snug. This holds the retaining latch back so the BBs should just fall into the magazine. Lightly shake if you get a BB Jam at the hole. I may make one that has a 40 BB Measure/larger hopper, but as is this cuts loading time down to about 10-20 seconds.

Designed in TinkerCad. You can Tinker it yourself
https://www.tinkercad.com/things/63p5vOr6GbR

H&K MP5 BB Speedloader V3.stl

Moving from Thingiverse due to the cruddy support and demands for Ads.

I'll be deleting my work from there once I become comfortable with the system. 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

kyootfox

Achievements

Seedling

Trailblazer

Debutant