Card boxes for the Witcher Gwent card game. 5 lids containing faction logos and one plain lid.

Gwent Card Boxes - Lids containing faction logos

box.stl

A 'print in place' ratcheting spanner/wrench.

Inspired by the freewheel mechanism on a bicycle, I designed this tool to be compact and strong but most importantly it can be printed in place, already assembled.

The internal gear rotates in one direction depending on which way round the tool is engaged. 

The spring latches into place perfectly to engage when tightening but slides over the teeth when spinning the opposite way.

All parts have been designed with 3d printing in mind with no need for support material. The 45 degree angle internally not only makes this easily printable, but it also locks the turning sprocket inside the frame.


#3Dprint

Ratchet Spanner Wrench 15mm

A rotating Sharpie pen container which uses a ball bearing and spring to lock into 4 different positions.

See this in use: https://www.instagram.com/p/CSzTqfMDwXI/?utm_medium=copy_link

#DIY

Sharpie Container

internal.stl

A simple lightweight and minimalist binder for attaching multiple hole punched pieces of paper.  Designed to be more portable than a lever arched file.

For the times when you need to carry a few pieces of loose paper but you don't need to carry a full file or folder.

See this in action here: https://www.instagram.com/p/CStojX6DhWw/?utm_medium=copy_link

#DIY

Paper Binder - compact and minimal design

A simple lightweight and minimalist binder for attaching multiple hole punched pieces of paper.  Designed to be more portable than a lever arched file.

Exclusive access to Kwerkshop models. Print and sell my models with a commercial license.

Print and Sell Kwerkshop Designs

Make your desk more exciting with this gorgeous and cute cat feet phone stand!
This model is scalable to your desired size but should hold most phones in portrait or landscape mode.

**Printing Instructions:**
Print with your desired layer height.
No support necessary apart from the slot where the tail goes in.
Parts are printed separately and assembled later.
Glue may be required for assembly.
Use a brim for the tail for more bed adhesion security.

**Filament in the images:**
Eryone Matte White
Sunlu Sakura Pink

Cat Feet Phone Holder - Commercial

cat_feet_phone_holder_beans_kwerkshop.stl

cat_feet_phone_holder_body_kwerkshop.stl

cat_feet_phone_holder_tail_kwerkshop

You may have seen this on social media and now you can download and print your own! 

Here we have all the parts to create the Ice Cream Shop room. Choose your colours wisely.

I designed this cute Ice Cream shop scene with multiple parts. Make the most of the colour scheme with multiple different ice cream textures.

I was lucky enough to be part of this amazing project by MaisonLumiere_3d and Skip_per07. 

All of these parts are scaled to be the correct size for the mansion rooms but you may want to scale to your desired size if you are printing individual parts.

Do you want me to design something for you? Message me on instagram @kwerkshop

Photos courtesy of maisonlumiare_3d on Instagram.

**Printing:**
Some parts require colour changes at certain levels, look at the images for inspiration.
Some parts require support but I've tried to keep this to a minimum.

Ice Cream Shop - Gelateria - Room 9 - Mansion

barrier_rope.stl

barrier_stand.stl

cash_register.stl

chair.stl

cone.stl

cone_holder.stl

cone_icecream.stl

counter_bars.stl

counter_bottom.stl

counter_top.stl

door_handle.stl

door_inside.stl

door_outside_frame.stl

dual_cone_stand.stl

floor.stl

sign_window_surround.stl

table_legs.stl

table_top.stl

tray_icecream.stl

tray_x12.stl

window_cone_pieces.stl

window_icecream_1.stl

window_icecream_2.stl

window_icecream_3.stl

window_lining.stl

window_outside_frame.stl

wood_panel_1.stl

wood_panel_2.stl

wood_panel_3.stl

wood_panel_4.stl

A pen pot in the style of a retro iMac G3. If you're old enough to remember this it was an iconic design of the late 1990s and came in lots of different exciting colours.

This pen pot has a tube to contain a decent sized collection of pens and a little shelf inside the screen area to store other things like rubbers or sharpeners.

Follow the colour scheme featured in the images or go rogue and choose your own.

All parts are scaled to fit on most regular sized printers but you may wish to scale them for your desired size.

Some parts will need to be glued together.
Supports are recommended on some of the parts depending on your setup.

iMac G3 Style Stationery Pot

base_imac_pen_pot_kwerkshop.stl

cd_drive_imac_pen_pot_kwerkshop.stl

screen_imac_pen_pot_kwerkshop.stl

speakers_imac_pen_pot_kwerkshop.stl

top_imac_pen_pot_kwerkshop.stl

tube_imac_pen_pot_kwerkshop.stl

The iconic puppy puppet SWEEP from the UK children's TV show 'Sooty and Sweep'.

Sweep has NEVER been seen like this before! Now he has legs! You can have your very own Sweep model for display. The surface of the body has been textured with fur like texturing and it has been carefully designed to it can stand perfectly with excellent balance.

Printing:
All parts apart from body print without support.
Parts glue together
Tolerances are tight so accuracy is important.
Colours in the images are references for the original character
Ears print in halves and glue together.

Sweep by Kwerkshop

kwerkshop_sweep_dog_body.stl

kwerkshop_sweep_dog_ears.stl

kwerkshop_sweep_dog_eyes.stl

kwerkshop_sweep_dog_mouth.stl

kwerkshop_sweep_dog_nose.stl

kwerkshop_sweep_dog_paws.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

kwerkshop

Achievements

Trailblazer

Fan Favorite

Sequoia

Novice Maker

Shooting Star

Pinned models