kosteklvp

Select a membership plan

Supporter

$10.00

/ month

Join me as a supporter, if you want to access all of my exclusive models and posts, or just want to show your appreciation.

I'll keep you updated with regular behind-the-scenes posts. This level also allows you to have a direct impact on what I create.

With your support, I can spend more time creating better and better works and continue to develop further. :)

Immediate access. Cancel anytime.

Champion

$25.00

/ month

Join me as a champion, if you want to access all of my exclusive models and posts, and if you want to use my exclusive models commercially. This level also allows you to have a direct impact on what I create.

With your support, I can spend more time creating better and better works and continue to develop further.

Immediate access. Cancel anytime.The models in this plan are restricted by licensing terms. View License.

kosteklvp1.5K followers

Follow

Wheelbarrow Handle 3d model

Wheelbarrow Handle 3d model

Wheelbarrow Handle 3d model

Wheelbarrow Handle 3d model

Wheelbarrow Handle 3d model

Wheelbarrow Handle 3d model

Wheelbarrow Handle

52 downloads · 3 years ago · This is a customizable handle for a wheelbarrow. It was designed for rod with a diameter of 30 mm. I

This model is restricted by licensing terms.

View license.

This is a customizable handle for a wheelbarrow. It was designed for rod with a diameter of 30 mm. It may as well work as a handle for other uses. If needed, there is attached an .f3d file, where you can customize it to the desired rod diameter.

Modification instructions

Open .f3d file in Fusion 360.
Open Change Parameters.
Edit rodDiamater parameter under UserParameters.

Recommended print settings

layer height: 0.2 mm
infill: 10% gyroid
perimeters: 4
solid layers: 6
avoid crossing perimeters: yes
supports: no

Avoid crossing perimeters (combing) should be enabled to prevent unwanted stringing inside. Print it as it is - on the closed side.

For this kind of application, printing with ASA or similar filament is recommended.

Tags:

Discussions

Wheelbarrow Handle

52 downloads · 3 years ago in

Replacement Parts

and

kosteklvp1.5K followers

Follow

This model is restricted by licensing terms.

View license.