Select a membership plan

$10.00
/ month

Join me as a supporter, if you want to access all of my exclusive models and posts, or just want to show your appreciation.

I'll keep you updated with regular behind-the-scenes posts. This level also allows you to have a direct impact on what I create.

With your support, I can spend more time creating better and better works and continue to develop further. :)

$25.00
/ month

Join me as a champion, if you want to access all of my exclusive models and posts, and if you want to use my exclusive models commercially. This level also allows you to have a direct impact on what I create.

With your support, I can spend more time creating better and better works and continue to develop further.

kosteklvp
kosteklvp1.5K followers
kosteklvp
kosteklvp
|
Image 1 of 6
Powerbank HRD-B3X Case 3d model
kosteklvp
kosteklvp
|
Image 1 of 6
Powerbank HRD-B3X Case 3d model
Powerbank HRD-B3X Case 3d model
Powerbank HRD-B3X Case 3d model
Powerbank HRD-B3X Case 3d model
Powerbank HRD-B3X Case 3d model
Powerbank HRD-B3X Case 3d model
Powerbank HRD-B3X Case 3d model

Powerbank HRD-B3X Case

This model is restricted by licensing terms. 

This case fits HRD-B3X module with 4000 mAh battery. The dimensions of the case are 67 mm x 100 mm x 22 mm. It consists of two parts (a base and a lid) and is designed to be glued together. It is fully covered with two cutouts for charging cable and microUSB port.

Recommended print settings

  • layer height: 0.2 mm
  • perimeters: 2
  • solid layers: 5
  • infill: 20% grid
  • supports: no

Assembly instructions

  1. Insert battery.
  2. Insert HRD-B3X board. Place microUSB input into rectangular hole.
  3. Pass the charging cable through the round hole. Connect it to the board.
  4. Put the lid on. The lid should be glued to the case.

I additionally used hot glue inside to keep everything together.


Discussions

Powerbank HRD-B3X Case

16 downloads · 4 years ago in  and 
kosteklvp
kosteklvp1.5K followers
This model is restricted by licensing terms.