Select a membership plan

$10.00
/ month

Join me as a supporter, if you want to access all of my exclusive models and posts, or just want to show your appreciation.

I'll keep you updated with regular behind-the-scenes posts. This level also allows you to have a direct impact on what I create.

With your support, I can spend more time creating better and better works and continue to develop further. :)

$25.00
/ month

Join me as a champion, if you want to access all of my exclusive models and posts, and if you want to use my exclusive models commercially. This level also allows you to have a direct impact on what I create.

With your support, I can spend more time creating better and better works and continue to develop further.

kosteklvp
kosteklvp1.5K followers
kosteklvp
kosteklvp
|
Image 1 of 5
Calibration Cube 3d model
kosteklvp
kosteklvp
|
Image 1 of 5
Calibration Cube 3d model
Calibration Cube 3d model
Calibration Cube 3d model
Calibration Cube 3d model
Calibration Cube 3d model
Calibration Cube 3d model

Calibration Cube

This model is restricted by licensing terms. 

This is a calibration cube based on Kostka3D's logo. The dimensions of the cube are 20 mm x 20 mm x 20 mm. The indentations are 1 mm deep. On the opposite side of each wall are small letters indicating X, Y, Z axes.


Recommended print settings

  • layer height: 0.2 mm
  • infill: 5% grid
  • perimeters: 2
  • solid layers: 5
  • seam position: aligned

It should be printed as it is without resizing.


Interpreting results

The width of each side of the cube should be equal. Each of the XYZ letters should be readable and clear.

Check it for any imperfections or deviations from the original.


Discussions

Calibration Cube

202 downloads · 4 years ago in 
kosteklvp
kosteklvp1.5K followers
This model is restricted by licensing terms.