Meet the Pug Slime Fidget - Your New Favorite Sensory Toy!

This awesome Pug Slime is a 100% print-in-place design. It’s incredibly easy to print—just use a brim! (I’ve already painted mouse-ear brims into the profile, which pop right off in seconds).

You can literally print and play. It uses zero infill, which means faster print times, less wasted filament, and it works flawlessly on any standard FDM printer.

I wouldn't recommend scaling it down too much, though tweaking it by +/- 5% should be totally fine.

There are no complicated locking joints to snap together, and absolutely zero risk of the parts fusing. It just flows and cascades beautifully right off the bed. Just remember to use Tree supports for the best results!

Warning: It's extremely addictive! Check out the video below to see it in action.

Want to design a slime like this in 5 minutes? Visit our website: Visit Kishmake and create any slime you want. Here is a coupon for 2 free projects! Code: Kishthangs

FDM Nozzle: 0.4 Layer Height: 0.2 Infill: 0-10% (15% if you want to add more weight to it) Support: yes best tree support (touch only build plate) Scale - no