This is a a small foldover bag that can be printed on build plate sized 256x256 or greater. It measures approximately 5.5" (14cm) wide x 5" (12.7cm) tall x 2" (5cm) deep There are two options. One option uses an 18mm magnetic snap (https://a.co/d/04aKzUld) as a fastener, while the other is a plain foldover bag without a fastener.

Assembling this bag will require a small amount of hand sewing. I like using a saddle stitch, but you can use whichever stitching method you prefer. I have included a basic video that demonstrates the process of sewing up a 3D printed wallet - https://than.gs/m/1520600

This is intended to be printed with a flexible material. I prefer printing these in 90a and 95a TPU. If you'd like a more rigid front panel, you can opt to print that in a 98a or 60d TPU.

The main panel is both the back of the bag as well as the purse flap. There is a left and a right side panel that will be sewn together in the middle. The accessory piece to attach a strap to should be sewn on as well, before attaching the sides to the main and front panels.

If you have a multi-color TPU printer, add on a modifier and customize it further! In the example photos, I used the xTool F2 Ultra UV laser to engrave a design into the sides.

If you have any questions, send me a note at Kaizen3DPrints@gmail.com

License Summary: Personal use only unless you hold a Commercial License. No resale or sharing of files. Selling printed models allowed only with an active Commercial License.