Infinity Bracelet, Earrings, Choker
This is a simple to print on fabric bracelet. There is a bracelet, choker, and set of earrings included with this file.
Earrings - 7cm printed length (3 inches, 4 inches with ring and hook) Bracelet - 14cm printed length (5 1/2 inches) Choker - 23.5cm printed length (9 1/4 inches)
You can estimate around 1 - 1.5 inches of additional length for the 2 jump rings and a small lobster clasp needed to attach the ends together. Add additional lengths of chain for custom measurements
There is a 3MF file that has the print settings. There are also the individual STL files if you wish to try your own settings.
In these examples I am using an illusion mesh from www.dfwfabricmart.com Fabric sample packs and holographic PFLAT sheets can be found on my website at www.kaizen3dprints.com
I print these with a .24mm layer height, for a total of 10 layers. The pause command is placed at the beginning of layer 9. I print the first layer at 35mm/s and the following layers at no more than 75mm/s. If I'm using a thicker mesh fabric, I slow my speeds down further and increase the layer height.
If you have any questions, please email me at Kaizen3DPrints@gmail.com
Happy Printing!
Infinity Bracelet, Earrings, Choker
Abstract art #2
Hand sewn vertical wallet
256x256 PFLAT sheet holder
Massage Roller
Spinning gear fidget ring
Flat band fidget ring
Large TPU foldover bag
Adjustable Strap (48"/122cm max length)
Small Foldover Bag
Customizable Passport Wallet
Tall TPU Bifold Wallet for sewing
Vertical Wallet for Chicago Screws
Square Grid Negative Modifier
Hex Grid Fabric Modifier
Heart Pixel Pattern Textile and Modifiers
Vertical TPU wallet with rivets and grommets
Flippy heart textile and modifiers
Foldable TPU bag sized for Snapmaker U1
Crossed Basket Weave Textile / Modifier
would like to understand how I can properly resize the set for custom lengths. ear ring are what is giving me issues.
Greetings! To either shorten or lengthen, you'll first have to right-click on the model and split them apart so you can interact with each piece. You can then select just your bottom piece and move it down along the y axis, providing more space in between. Select the pieces above (how many depend on how much length you're adding) by selecting both objects followed by copy and paste. Adjust the spacing in between the links to your preference, select all, and merge them back together as one unit. You should be good to go! If you have a follow-up question, you're welcome to email me at kaizen3dprints@gmail.com for a faster response:)
Is there a specific fabric you recommend for these? We are having issues with them tearing using walmart tulle.
Walmart tulle does tear very easily. I use illusion mesh from www.dfwfabricmart.com that's quite strong