tracking pixel
Daniel B

Hexagon pyramid cuff - snaps and strap version

by
kaizen3dprints
Follow
Follow
Remix Model
kaizen3dprints
kaizen3dprints
|
Image 7 of 7
Hexagon pyramid cuff - snaps and strap version 3d model
kaizen3dprints
kaizen3dprints
|
Image 7 of 7
Hexagon pyramid cuff - snaps and strap version 3d model
2D
3D
Makes
Hexagon pyramid cuff - snaps and strap version 3d model
Hexagon pyramid cuff - snaps and strap version 3d model
Hexagon pyramid cuff - snaps and strap version 3d model
Hexagon pyramid cuff - snaps and strap version 3d model
Hexagon pyramid cuff - snaps and strap version 3d model
Hexagon pyramid cuff - snaps and strap version 3d model
Hexagon pyramid cuff - snaps and strap version 3d model
This model is restricted by licensing terms. 

This is a patterned model for a cuff of various lengths (measured at snap fasteners), between 16.5cm and 24.5cm. The 3mf and STL files are labeled by approx size. If you have a larger printer and you'd like to create a longer cuff, split the model into single objects, move the snap modules up and copy and paste however many additional sets you'd like to increase the length. 3 sets of size 15 (3/8") snap fasteners are used for this print. See attached printing guide for additional printing recommendations and source materials.

An additional version has been added that allows for a piece of stretch fabric to be laced up, instead of using the snap fasteners as an attachment method. The fabric I used - https://www.michaels.com/product/10mm-rainbow-mix-elastic-cording-9ct-by-creatology-10709949?michaelsStore=9805&inv=4


17 Likes46 DownloadsMay 28, 2024


17 Likes46 DownloadsMay 28, 2024
This model is restricted by licensing terms.