5 inch kiss clutch hex and diamond pattern

This is the STL file to print an outer kiss clutch style lining, with assembly instructions. This will require the additional purchase of specific hardware, chain, and mesh - found at https://kaizen3dprints.com/products/5-inch-kiss-clutch-kit - You can find them in a 4 pack of just the hardware here https://a.co/d/25lWi3T. There is currently a max order of 1 kit per customer at this time.

This can be printed on a build plate as small as 180x180

This clutch style and size was chosen so that multiple versions can be printed and swapped out, depending on the users preference.

This is a 5" clutch, with two sizes of the same pattern - A hex and diamond grid. This requires basic sewing skills - a straight stitch and a zig zag stitch, a 3d printer, some mesh fabric, and about 30-60 minutes of assembly time depending on skill level. There is a PDF guide to show you step by step on how to print and assemble this purse.

There is a 3mf file with some premade patterns, with various labeled thicknesses depending on the opacity desired. I was using some stained glass-like filament and a little thicker of a model worked out better - The choice is yours! You can also download either STL file and have a crack at creating your own print settings. I generally print the first layer at 35mm/s with a layer height of .24mm. Depending on the thickness of the print, the pause will be placed in the middle of the print. For example - If I have a thickness of 1.2mm, with a .24mm layer height - that means I have 5 layers. The pause command would be placed at layer 4 (the beginning of) in order to fully encapsulate the fabric.

If you have any questions, please don't hesitate to contact me at Kaizen3DPrints@gmail.com