4 ghosts in a frame 3mf.3mf
Boo! Here is a simple print on fabric design. They are approximately 4.5" x 6", with a loop at the top to hang them from. There are 4 different patterns. I'm currently printing up a glow in the dark orange with a black frame and illusion mesh from www.dfwfabricmart.com as well as a recycled plastic rainbow version - both on holographic plates. You can make them any color you'd like!
These are set at 1.2mm thick, 5 layers at .24mm thickness with a .4mm nozzle. (You can adjust to .72mm overall height if you'd like a faster print) There is a 3mf file that has a pause command added at layer 4 with preset speeds. You can also download the individual STL files if you'd like to play around with your own settings. A good rule of thumb is to keep your layer height at your fabric thickness. I print between 35-50mm/s.
These files are free to download and are for personal use only.
I've included my generic printing on fabric guide as well. If you have any questions, Please send me an email at Kaizen3DPrints@gmail.com
4 ghosts in a frame 3mf.3mf
Hand sewn vertical wallet
256x256 PFLAT sheet holder
Massage Roller
Spinning gear fidget ring
Flat band fidget ring
Large TPU foldover bag
Adjustable Strap (48"/122cm max length)
Small Foldover Bag
Customizable Passport Wallet
Tall TPU Bifold Wallet for sewing
Vertical Wallet for Chicago Screws
Square Grid Negative Modifier
Hex Grid Fabric Modifier
Heart Pixel Pattern Textile and Modifiers
Vertical TPU wallet with rivets and grommets
Flippy heart textile and modifiers
Foldable TPU bag sized for Snapmaker U1
Crossed Basket Weave Textile / Modifier
Thin Beaded Textile / Modifier
