Model Full Ice Edition now released!
The goal of this hockey game is to get as many pucks into your opponents end extra points are awarded for shots that go into your opponents net!
Set a timer for 5min and battle away shooting as many pucks with your printed sticks into their section after 5 min is up count the goals and see who wins!
How to play
Rules:
- Each player puts 5 pucks on their side.
- The game is played with one hand.
- Use the stick to fire the pucks to the other side of the board.
- Only one puck is moved at a time.
- As soon as the game starts, there is no pause allowed.
- Whoever gets the most goals ion 5 min wins.
Important Rules;
When the game starts, the puck cannot be moved to clear the way of pucks If a puck should fly out of the board, the game doesn’t pause and the player must go pick it up by himself.
Suggested print settings:
3 walls 10% infill 4 Top/Bottom layers (ironing is optional) supports are optional for the puck gate if you dont trust your bridging Materials:
One piece of 1.75mm to join the boards together 12 3x2mm magnets 300-350mm of 2.5-3mm elastic cord Changes:
added a rounded edge /w build in layers for easier coloring/painting on the STL file as well as BL 3mf file for easier access to the attached step files inside! Full Ice Edition:
Print a stick and smaller pucks and fight your way to the win the old school way! (Nets coming soon)
Uses 3x2mm magnets which will hold the nets in place and challenge your friends to classic finger hockey!