Easy to print Keychain Pegboard Hook Holder
Premade supports for the Bottom you can either remove them or keep them as part of the sealed base its up to you! Uses standard 1" spacing /w 6mm hook diameters
Hollow bottom for you to add weights like BB's or Pellets (supports included in design)
Hardware needed:
x2 M3 Heat inserts or 1/2" Screws per Spinner bottom Pellets or BB's 2.5x1mm Zip Ties 10 or 12x3 or 10 or 12x4 magnet (top cap for price tag options) 1" Wood doweling (height is up to you but recommend no more then 2 stacks tall) 1" spacing hooks x 5.4mm or less pegs (recommended to not go longer then 6") Base has a Diameter of 154mm (6")
3D PRINTING SETTINGS
-Voron Spec Recommended
Minimum Print Settings: 4/4 Top/Bottom 4 or 5 walls 20-25% infill
If you enjoy these designs please consider purchasing the files off Cults3D or buying me a coffee as every dollar gets put back into more designs and creations!