#ThangsBambuContest
As Spotlighted by BambuLabs on their instagram (go like and follow them):
https://www.instagram.com/reel/CnFJ3GxovY9/?igshid=Yzg5MTU1MDY=
Designed for a quick usage until a full case mod can be created but gives the user a glass top to protect the Head and allow an AMS unit to be stored on top.
Things to accomplish/add:
PFTE tube addition built-in or as an add-on option - completed Multiple color options for AMS unit's Built-in Y splitting option - completed
Easy print will require some supports orientation is up to you i would print it top down and mild supports for the overhangs and parts to give it better bed adhesion
will require a mixture of M3 and M2.5 bolts and nuts from the 8-12mm length and the occasional nut as not all holes are threaded or required i just punched holes according to the frame.
Some fit testing may be required as it is a semi snug fit to top of unit.
Will also work with my Remixed top slider and LED enclosure that's currently in development and also working on a full case enclosure mod
** Front piece's are just a placeholder for any future case designs and are just held in place with the clips and double sided tape*"
I have fit tested it ot my P1P's and they fit i did a few minor revisions that are untested but should give it more accessibility and better fits.
Print settings:
Material Suggested: PETG but recommend ASA or ABS 4 T/B layers 3 walls 20-25% Gyroid Infill Supports on(Top Down, with Standard settings (Hybrid and Tree don't seem to work right with model) Brim 3mm /w 0.5mm spacing 75mm/s outer wall speed Material used :
Main Pieces: 225g+/-
Accessories: 60-75g +/-
Print time:
10hrs +/-
Associated Files:
Ventilation Glass top: https://www.printables.com/model/348616-bambu-p1p-and-x1-top-glass-modification-w-led-chan Y splitter (3x6mm design) https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec Spool Holder /w P4-M10 pneumatic connection: https://www.printables.com/model/356213-bambu-side-filament-arm-w-m10-thread-wip
Hardware:
x6 M4 screws (BL supplied) x6-8 M4x12 hex nuts x2 M4x14-16 hex nuts (filament holder) Single sided foam, or Carpet tape (what i used) Double sided tape (optional) x6 3x6mm magnets for the Y adapter add-on x3 M10 pneumatic fittings (x4 if using side filament holder)Revisions:
Dec 29:
added more wall thickness to back by 2mm Adjustments to holes for better access Dec 30:
Changed the model to have the ends as clips and a full center piece Added TPU PFTE adapter for the back of unit the gets put in between the Backer and the frame cleaned up the model and added a wrap around front Dec 31:
Completed the v2 compile and test fits were within tolerance and should print for more users Made minor adjustments to the total design to make pieces smaller and easier to print in the event there is a failure Added a few special accessories that i'll upload to the design that'll help with things like an Upper Rear Filament holder, TPU insertable PFTE tubes and a Built in Y splitter from another designer that can be used as an adapter to the design (will release these as they are officially printed and tested! Jan 1:
Officially released files are now live and ready for public Printing!!! Adjusted and Corrected the Magnetic Adapter portion to the L1 Magnetic Backer to better fit with the adapter that needs to be glued in