Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4309535.

This sensor mount remix is designed to use the same sensor the Prusa MK3 uses since the PCB is easy to buy on Amazon, Aliexpress, etc. 

The mount uses the same screws mounting screws used to secure the trapezoidal nuts. You'll need an M2 x 8mm screw (usually included with the sensor kit) to attach the PCB to the mount. I suggest adding two small pieces of PTFE tubing to the mount since they'll prevent light from getting into the sensor and accidentally triggering it. 

I've included the native design files in case anyone would like to modify the design to fit their printer. 

Ender 3 Optical Filament Runout Sensor Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4365796.

This battery adapter is designed to adapt 7 x AG13 batteries (also known as LR44, G13, A76, GP76A, 357 & SR44W) to fit a V74PX battery used on some low-cost voltage reference boards using the AD584LH voltage reference. 

The 15V, V74PX battery is hard to find and very expensive, so this adapter makes using these cheap reference boards easier and more cost-effective.

WARNING: The voltage reference board requires a supply greater than ~12V to operate, so stacking seven AG13 batteries together (~21V total) is acceptable. If you're looking to use this adapter for other applications, you'll need to print a spacer that takes the place of two batteries. 

AD584LH Voltage Reference Battery Adapter (V74PX to AG13 Coin Cell)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4593206.

I couldn't find the original socket covers that came with this motherboard, so I printed a replacement set. I started with a .step file for a commercial socket cover and modified it to improve printability. The locking clips were strengthened to prevent breakage, additional material was added to a few places, and all unnecessary overhangs were eliminated. I've included the source files in case you want to tweak the design yourself!

LGA 3647 Socket Cover

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5152070.

A simple tool for visualizing coordinate systems. This tool helps users understand rotation and movement while maintaining a coordinate system visualization. 

Coordinate System Tool

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4728813.

A simple pill bottle holder/organizer that allows CVS brand pill bottles to be stacked and organized. "Regular" CVS pill bottles and "slim" CVS pill bottle designs are included. The pill bottles are designed to "snap" into place for easy storage and organization. 

The original design files (included) are fully parameterized, allowing the print to be adjusted to fit any diameter bottle. 

Simple CVS Pill Bottle Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4728833.

This is a remix of https://www.thingiverse.com/thing:3140566 that I modified to fit an AccuRite Moisture Monitor (Hygrometer). All of the hygrometer's vents and buttons are accessible so as to not affect the sensor's sensitivity. 

AccuRite Humidity Moisture Monitor Hygrometer Mount Holder for Dry Box

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4497205.

This adapter allows the stock, 6-inch hose to attach to a sheet metal duct in the same way the included window adapter attaches. I designed this to connect to an exhaust vent built into the side of my house, but it should also be useful for mounting to ceiling tiles, walls, etc. 

I've included the native IPT file in case you need to add screw holes or other mounting hardware to the design.

Toshiba Portable Air Conditioner (AC) Exhaust to 6 Inch Duct Adapter

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

juchong

Achievements

Seedling