#DIY #flashforge #thangs3d Customizable desk organizer depending on each need and the amount of items you want to place.
It consists of the base organizer, cell phone holder, sticky note compartment, small multi-element holder, large multi-element holder and three drawers with one smaller than the other two.
All holders were designed to be placed in various positions on the base organizer.
It is designed to print in 3D considering the limitations of 3D printing.
Dimensions: The base organizer is 260mm length x 140mm width x 100 mm height, the large multi-element holder is 65mm x 35mm x 43mm, the small multi-element holder is 50mm x 35mm x 43mm, these have a 2mm wall thickness, the cell phone holder is 50mm x 35mm x 53mm with a 3mm wall thickness, the big drawers are 85mm x 82mm x 45mm, the small drawer is 80mm x 82mm x 45mm.
Organizador de escritorio personalizable dependiendo de cada necesidad y de la cantidad de articulos que desee colocar. Se compone del organizador base, soporte para telefono celular, compartimento de notas adhesivas, soporte multielementos chico, soporte multielementos grande y tres cajones giratorios. Todos los soportes fueron diseñados para poder ser ubicados en varias posiciones del organizador base. Esta diseñado para imprimir en 3D considerando las limitaciones de la impresion 3D. Dimensiones: el organizador base tiene 260mm largo x 140mm ancho x 100mm alto, el soporte multielementos grande tiene 65mm x 35mm x 43mm, el soporte multielementos chico tiene 50mm x 35mm x 43mm, estos tienen un espesor de pared de 2 mm, el soporte del telefono celular tiene 50mm x 35mm x 53mm con un un espesor de pared de 3 mm, los cajones grandes tienen 85mm x 82mm x 45mm, el cajon chico tiene 80mm x 82mm x 45mm.
STL Files here: https://thangs.com/juankmed/Desk-Organizer-III--STL-Files-24987