iPad mini yoke mount C152_172, height adjustable

jsnchz89

Remix Model

Social

Makes

iPad mini yoke mount C152_172, height adjustable - best print layout, works well on ender 3 build plate, 220x220x300.

Recommended slicer settings:
PETG, 0.4mm nozzle, 0.2mm layer height.
Minimum: 4 walls, 4 top layers, 4 bottom layers
multiply infill lines by at least 3x for good strength, with these settings you'd wanna do at least 15% infill - 3d model

iPad mini yoke mount C152_172, height adjustable 3d model

iPad mini yoke mount for Cessna 152/172. Adjust height by pressing tab on mount arm. Slide off completely to stow away for easy travel. There is a passthrough hole for charging on the bottom of the mount.

Made with PETG For best part strength, print bolts/screws laying down and use supports for the threads Print all parts with at least 4 layers of walls, top, & bottom layers. Multiply infill lines by at least 3 & use no lower than 20% infill

Tags:

7 Likes74 DownloadsAugust 14, 2022