jolson212198645 followers

Follow

Testors Paint Carousel 3d model

Testors Paint Carousel 3d model

Testors Paint Carousel 3d model

Testors Paint Carousel 3d model

Testors Paint Carousel

17 downloads · 4 years ago · Uploaded by Thangs Sync

Uploaded by Thangs Sync

Community Makes (1)

Printed in two of Flashforge's PLA Silks, Dream Trio and Rainbow Waltz.
Took about 6hrs to print in total with a 0.4mm nozzle at 300mm/s, 15% gyroid infill. No issue printing the model, it just fit the build plate without resizing and rotates with ease with the weight of the paints.

Printed in two of Flashforge's PLA Silks, Dream Trio and Rainbow Waltz.
Took about 6hrs to print in total with a 0.4mm nozzle at 300mm/s, 15% gyroid infill. No issue printing the model, it just fit the build plate without resizing and rotates with ease with the weight of the paints.

Community Makes (1)

Printed in two of Flashforge's PLA Silks, Dream Trio and Rainbow Waltz.
Took about 6hrs to print in total with a 0.4mm nozzle at 300mm/s, 15% gyroid infill. No issue printing the model, it just fit the build plate without resizing and rotates with ease with the weight of the paints.

Printed in two of Flashforge's PLA Silks, Dream Trio and Rainbow Waltz.
Took about 6hrs to print in total with a 0.4mm nozzle at 300mm/s, 15% gyroid infill. No issue printing the model, it just fit the build plate without resizing and rotates with ease with the weight of the paints.

Discussions

Magical_Flame1 year ago

Printed in two of Flashforge's PLA Silks, Dream Trio and Rainbow Waltz. Took about 6hrs to print in total with a 0.4mm nozzle at 300mm/s, 15% gyroid infill. No issue printing the model, it just fit the build plate without resizing and rotates with ease with the weight of the paints.

Printed in two of Flashforge's PLA Silks, Dream Trio and Rainbow Waltz.
Took about 6hrs to print in total with a 0.4mm nozzle at 300mm/s, 15% gyroid infill. No issue printing the model, it just fit the build plate without resizing and rotates with ease with the weight of the paints. 3d model

3d model

3d model

3d model

PrinterFlashforge Adventurer 5M Pro

Print bed sizeX: 220 mm; Y: 220 mm; Z: 220 mm

MaterialPLA

Layer height0.2 mm

Infill density15 %

Testors Paint Carousel

17 downloads · 4 years ago

jolson212198645 followers

Follow