Joshua C
Awarded to:jchunick
First Make published
DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
profile hero image
jchunick’s profile picture

jchunick

0 followers0 downloads

Achievements

50 Models downloaded badge
Voyager
50 Models downloaded
First Make published badge
Novice Maker
First Make published
All
Sort by:

12 oz Dragon D20 magnet spinner can cozy

12 oz Dragon D20 magnet spinner can cozy - Here's my version of the mug, fully painted, with UV resin inlay. This is my process: 1. first, printed it in a matte black so I would have a nice, dark, matte surface as my base for the paints and resins. 2. next, I painted the wooden part of the handle using various acrylic paint browns, with Dwarven Forge's Pokorny Paint Base Brown as my base. I also applied brown and black washes to get into the "wood grain". 3. then it was on to the smooth bit of the handle which I used Vallejo's Gunmetal Blue 70.800 with blue mica powder mixed in. I used the same Gunmetal Blue & mica powder mix on the mug rim and base line work, as well as the vertical line work and background of the circle containing the dragons. For all that I didn't worry about painting over the dragon as my next layer would cover it. 4. the next part involved using a cloth and the Silver Wax Metallic Finish from craftsmart to buff onto the high spots of all the filigree detail, the dragon and the spinning ring with the numbers. 5. lastly, I mixed up a batch each of blue mica powder with some blue tinted clear UV resin along with the same in red. I used a toothpick to dab in drops of the resin into the space around the numbers on the spinning dial, and the arrow filigree that marks the number rolled, marking the 20 with the red batch along with the eye of the dragon on either side of the mug. I used a UV flashlight to cure the resin as I went along. I haven't yet added the cork base that I still need to cut out of a 1mm thick sheet of cork with an adhesive backing. Nor have I clear coated it with a matte finish, but I will be doing that when I get those materials. - 3d model