My kid wanted a countdown display to Christmas......the problem being it's January and this awesome design from PA1 (via Patreon) only has slots for two digits!   I could have tried to remix the top piece but I would have wanted it centered a bit more would would be difficult so I just made up a little adapter to hold three digits!

Settings:
Print with the two pegs facing down so that the texture on the top comes out good.  Because of this, support is needed and stronger settings to prevent the pegs from breaking off.


0.20mm layer height
6 walls
25% infill
Supports
Fuzzy Skin - Contour
Fuzzy skin point distance 0.4mm
Fuzzy skin thickness 0.3mm



Three Digit Adapter for `RUDOLPH'S CHRISTMAS COUNTDOWN`

Countdown Adapter v5_final.stl

This is a simple insert that fits in a [Multigrid bin of size 1x1x0.5](https://thangs.com/designer/Keep%20Making/3d-model/1x1x0%C2%B75%2C%20Full%20Lock%20Holes%2C%20Multigrid%20Bin-973774) from the [MultiBoard](https://www.multiboard.io/) universe.

I did not include any way of locking it in place in the design, so to not have to modify the original bit itself, I decided to just drill a small hole in the bottom *through* the bin into this insert and threaded a M2.5 bolt in place. This keeps the insert from moving around or popping out.  Easy peasy. 

No special print settings needed.  I used `0.2mm Standard` setting in Bambu Studio which defaults to:

Layer height: 0.2
Walls: 2
Infill: 15%

Razor Blade Holder Insert for Muligrid Bin (1x1x0.5)

MultiBin Razor Holder Insert v4.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

jasper9

Achievements

Voyager

Seedling

Three Digit Adapter for `RUDOLPH'S CHRISTMAS COUNTDOWN`

Razor Blade Holder Insert for Muligrid Bin (1x1x0.5)