Peeps!!! The candy you hate to love!

These fidgets make a satisfying click when fitted with a key switch.

There is a single color STL model, and a multicolor 3MF file. Also one with and without keychain holes. Ball chains work great for all my keychain models.

Most key switches fit nice and tight. I recommended Kailh box white 3-pin key switches. They are good quality and very clicky! They are also easily available on Amazon or AliExpress.

ATTENTION: The 3MF contains settings to print fuzzy skin just on the outside of the peep (top). There are two modifier cylinders to be sure that the fuzzy skin does not print on the inside to preserve the key switch part. Please be sure these settings remain intact, or the key switch will not fit properly.

0.2 layer height

2 walls detect thin walls ON classic walls concentric top layers top shell layers 4 8% gyroid infill Supports needed for the top (peep part) only one layer on top surfaces OFF*

*This is a setting under Quality on Bambu Studio. You should leave it permanently OFF (NOT APPLIED) in order to get better top surfaces on your prints.