If you are worthy, you can wield this hammer and click to your heart's delight. Thor's hammer in a pocket version that will make anyone feel powerful enough to take on another world.

These fidgets make a satisfying click when fitted with a key switch, and look adorable on your keys, purse or backpack.

There is a single color STL model, and a multicolor 3MF file. The hammer head prints at an angle with supports. The handle prints with supports and screws into the head (glue for extra security). All the supports are super easy to remove.

Most key switches fit nice and tight. If your key switch has an outline around the center cross and does not fit in the cap, the outline can be trimmed off for a good fit. I recommend Kailh box white 3-pin key switches available on Amazon and AliExpress. They are good quality and very clicky!!

0.16-0.2 layer height

3 walls

arachne walls

detect thin walls ON

concentric top layers

top shell layers 4

8% gyroid infill

Supports needed for both parts- tree on buildplate

only one layer on top surfaces OFF*

*This is a setting under Quality on Bambu Studio. You should leave it permanently OFF (NOT APPLIED) in order to get better top surfaces