Join my Patreon today to get this model and at least 20 others this month!! patreon.com/Jambabydesigns

Have you always wanted your very own piglet?? Well here is one you can click, and another that's a bobblehead!! And in case you need a flying pig, there are some of those, too.

These fidgets make a satisfying click when fitted with a key switch, and look adorable on your keys, purse or backpack. And the bobblehead version can shake her little head while she sits on your desk or computer.

Clicker version is available with and without keychain holes. The keychain version fits a ball chain nicely.

There is a single color STL model, and a multicolor 3MF file. Each part is no more than 4 colors for easy printing with an AMS. The heads do need supports while printing. I recommend tree supports on the buildplate.

Most key switches fit nice and tight. I recommended Kailh box white 3-pin key switches. They are good quality and very clicky! They are also easily available on Amazon or AliExpress.

3D printing settings 3D printing settings

0.2 layer height

2 walls

detect thin walls ON

concentric top layers

top shell layers 4

8% gyroid infill

Supports for the heads- tree on buildplate

only one layer on top surfaces OFF*

*This is a setting under Quality on Bambu Studio. You should leave it permanently OFF (NOT APPLIED) in order to get better top surfaces on your prints.