Use as you wish, including for commercial purposes. Designed to be printed in vase mode.

Printing was done with 0.4 nozzle and 0.8 line width with 0.3 layer height.

**_Due to the amount of curves, I did not reduce the amount of vertex of the object._**

Would you like to see a lot more free content like this? Consider sending me a coffee on Paypal: https://www.paypal.com/donate/?hosted_button_id=CGNG26WVJUH5G

Spiral Screw Pack - Vase Mode

Kit_02_Espiral_01.stl

Use as you wish, including for commercial purposes. Designed to be printed in vase mode.

Printing was done with 0.4 nozzle and 0.8 line width with 0.3 layer height.

Would you like to see a lot more free content like this? Consider sending me a coffee on Paypal: https://www.paypal.com/donate/?hosted_button_id=CGNG26WVJUH5G

Spiral Pack - Vase Mode

Kit_01_Espiral_01.stl

[Hug icons created by Victoruler - Flaticon](https://www.flaticon.com/free-icons/hug)

Would you like to see a lot more free content like this? Consider sending me a coffee on Paypal: https://www.paypal.com/donate/?hosted_button_id=CGNG26WVJUH5G

Hug Keychain

I created these decorative pots specifically for succulents. It was designed to be printed in vase mode, only the feet must be printed in normal mode so that the fit is perfect.

The fit is perfect for 4mm wooden rods. If you increase or decrease the proportion of the object in the slicer, consider this when choosing the rod you will use to make the legs.

The package includes 3 different sizes: 5x5x5 cm, 6x6x5 cm and 7x7x5 cm.

If you want a perfect fit, cut the wooden rod at an angle at the top, this angle was necessary so you could print in vase mode. The fit is very tight and there is no need for glue, but if you want it for safety reasons, do as you wish.

**If you want to use it commercially, get in touch.**

Would you like to see a lot more free content like this? Consider sending me a coffee on Paypal: https://www.paypal.com/donate/?hosted_button_id=CGNG26WVJUH5G

Vase With Legs

Vase-5x5x5.stl

There are 40 emoji keychains for different situations. Not all have been tested on real print, if there is any problem please let me know so I can fix it. The scale of the objects is the way I thought it was ideal, increase or decrease it and test it to see how it looks. I cannot guarantee a perfect print on sizes other than the ones I have tested.

**If you want to use it commercially, get in touch.**

Would you like to see a lot more free content like this? Consider sending me a coffee on Paypal: https://www.paypal.com/donate/?hosted_button_id=CGNG26WVJUH5G

Layer Height: 0.2
Filling: 10%
Nozzle: 0.4
Speed: 50
Printer: Anycubic Vyper
Filament: ESUN PLA+

I used Cura 5 for slicing, I advise using this version because there are some functions that considerably improve the printing of small details, even with a 0.4 nozzle.

EMOJI KEYCHAIN FULL PACK

01.stl

Complete pack of 40 keychains here: https://cults3d.com/en/3d-model/various/emoji-keychain-pack

EMOJI KEYCHAIN PACK

03.stl

Decorative vase I designed to place my succulents around a tree.

Would you like to see a lot more free content like this? Consider sending me a coffee on Paypal: https://www.paypal.com/donate/?hosted_button_id=CGNG26WVJUH5G

Succlent Vase

**No print tests have been done on this object. ( This object will likely need supports )**

If you want a specific design in the middle of the pendant, just send me an SVG file and I'll include the project on that same page.

Would you like to see a lot more free content like this? Consider sending me a coffee on Paypal: https://www.paypal.com/donate/?hosted_button_id=CGNG26WVJUH5G

LOVE PENDANT

**No print tests have been done on this object.**

Objects are true deck sizes (except height). Resize as you wish.

Would you like to see a lot more free content like this? Consider sending me a coffee on Paypal: https://www.paypal.com/donate/?hosted_button_id=CGNG26WVJUH5G

DECK OF CARDS KEYCHAIN

club.stl

**No print tests have been done on this object.**

Would you like to see a lot more free content like this? Consider sending me a coffee on Paypal: https://www.paypal.com/donate/?hosted_button_id=CGNG26WVJUH5G

DECORATIVE VASE

DECORATIVE VASE PACK

ATTACK TURRET

Object printed with 0.4 nozzle, 0.2 layer resolution. I advise using 0.3 or lower nozzle to print the snap pins for better quality.

I didn't use supports.

Other settings adjust as you wish.

PS: The custom version has not been tested in real print, run the tests and tell me how it looks.
PS: It may be necessary to make some adjustments to the hinges if the lid does not open, sand the edges until you have the desired result.

Would you like to see a lot more free content like this? Consider sending me a coffee on Paypal: https://www.paypal.com/donate/?hosted_button_id=CGNG26WVJUH5G

CHEST

chest-all.stl

Decorative vase with hollow detail.

Configure as you wish, in my tests I didn't use support, but I had to make some manual corrections at the end of printing.

Would you like to see a lot more free content like this? Consider sending me a coffee on Paypal: https://www.paypal.com/donate/?hosted_button_id=CGNG26WVJUH5G

Decorative vase with hollow detail.

Configure as you wish, in my tests I didn't use support, but I had to make some manual corrections at the end of printing.

This is an object created for testing the thangs system, 3D printing has not been tested. Do it yourself.

Would you like to see a lot more free content like this? Consider sending me a coffee on Paypal: https://www.paypal.com/donate/?hosted_button_id=CGNG26WVJUH5G

POT FOR PLANTS

This is an object created for testing the thangs system, 3D printing has not been tested. Do it yourself.

Games lover since childhood, after many years using Blender as a hobby, today I feel confident to be able to market my work or distribute them for free.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

jackassets

Achievements

Seedling

Explorer

Up and Coming

Spiral Screw Pack - Vase Mode

Spiral Pack - Vase Mode

Hug Keychain

Vase With Legs

EMOJI KEYCHAIN FULL PACK

EMOJI KEYCHAIN PACK

Succlent Vase

LOVE PENDANT

DECK OF CARDS KEYCHAIN

DECORATIVE VASE

DECORATIVE VASE PACK

DECORATIVE VASE

ATTACK TURRET

DECORATIVE VASE

CHEST

DECORATIVE VASE

POT FOR PLANTS