Park Tool P-Handle Multiboard. Use any push fits -- load bearing ones are great.

Fusion file included if you want to tweak it.

Park Tool P-Handle Multiboard

Park Tool P-Handle Multiboard Holder.stl

See Fusion 360 files. This is a collection of Reolink camera mounts for single gang junction boxes.

RLC-842A and FE as well as many other Reolink cameras are supported with these.

All the boxes contain enough room to hold all the cables.

Recommend printing with 5+ perimeters in PETG for longevity -- although PLA has lasted many years outdoors for me as well.

Reolink Junction Box for Various Models

Reolink Junction Box.stl

This is an adapter for Erich Moraga's ZSS to allow it to friction fit to the steering column. It's a slightly improved fit over Erich's version. I've had it stay in place for 3+ years through the summer with no issue. Recommend printing in PETG or ABS so it can flex slightly without permanently deforming.

Comma AI OpenPilot ZSS Sienna or Corolla Mount

ZSS Sienna.stl

This is a simple remix of https://www.printables.com/model/476557 for a single gang rectangular box.

THANK-YOU to anyone who also includes F360 files with their uploads. :) I've done the same here.

UniFi U6-Lite Single Gang Junction Box Adapter

UniFi U6-Lite Single Gang Junction Box Adapter.stl

Wall mount for Tailfin X Clamp Pannier Bags. Fusion 360 file for changing screw sizes and spacing, etc. is included.

I've mounted it to both a wall mount storage system and a wire basket using a clip. I've attached the F360 for my basket mount as well.

The included models are for M4 screws.

The mount can be shrunk down significantly. I've attached a "small" version as well.

I recommend printing in PETG with 5 perimeters, but PLA or many other filaments are probably ok.

Tailfin X Clamp Pannier Wall Mount

Tailfin X Clamp Pannier Wall Mount.stl

Flexible screwdriver or tool organizer. Attaches using any push fits. I found the regular ones were strong enough for anything I wanted to add, but you could do the load bearing or 'strong' ones if you are placing heavy things or bumping it often.

Thanks to MarcelVila who did the hard work. https://www.thingiverse.com/thing:4261420/

Multiboard Screwdriver Tool Organizer

Multiboard Screwdriver Tool Organizer.stl

Connect two multiboards back to back. This works if they are 2 spaces apart. See photo.

3 Sided Bracket - Remix of Type 4, Big Thread Holes, 1x1 Inside Bracket

Type 4, Big Thread Holes, 1x1 Inside Bracket.stl

Use M3 or M4 bolts to attach Multiboard or Honeycomb Storage Wall to your Gladiator GearWall.

Print them all on the side.

PETG recommended. PLA as a second alternative. ABS doesn't have great layer adhesion, which can cause premature splitting, especially on the M3 model. The top and bottom M3 holes are the most prone to stripping with any material, but even when they do, I've been unable to pull a screw out.

Gladiator GearTrack or GearWall Multiboard Honeycomb Storage Wall Adapter

Multiboard HoneyComb GearTrack GearWall M3.stl

Just a blank square with a short push fit. I needed to add a sticker with parameters to my multiboard since I had no flat surfaces.

Fusion file included so you can remix it.

Multiboard Blank Board

Multiboard Blank Board.stl

Shimano Di2 Charger Multiboard Mount

Fusion file included if it's not how you'd like.

Shimano di2 Charger Multiboard

Shimano di2 Charger Multiboard.stl

2x SRAM AXS Charger. It's built for Multiboard, but can be wall mounted this way.

If using Multiboard, use 2x 9mm Small Thread Shank T-Bolt: https://thangs.com/designer/Keep%20Making/3d-model/9%20mm%20Small%20Thread%2C%20Flat%20Head%2C%20Shank%20T-Bolt-974207

Based off the SRAM official 3D model for charger mounts: https://www.thingiverse.com/thing:5345798/

Fusion file attached so you can customize how you see fit.

SRAM AXS Charger Wall Mount or Multiboard

SRAM AXS Charger Wall Mount or Multiboard.stl

It has a nice friction fit, but needs 2-4 small pieces of VHB tape to be secure.

Print in PETG (recommended) or ABS/ASA. With ASA I recommend adding a brim.

PLA will work, but the top tab that provides some positive locking feedback will wear out as it's designed to flex a small amount.

Print with 3 walls, 15% infill.

Fusion 360 file is attached. The bottom hole needs ~1mm offset.

Gladiator GearTrack / GearWall Dewalt DCB102 Wall Mount Bracket

Part2.stl

This is a OneUp EDC steerer tube plug with room for a Tile Sticker tracker.

This one fits great inside a 2022 Pike. Fusion 360 file is attached to modify it.

I have printed this in TPU 95. You may be able to modify it to work with other filaments, but it would require several adjustments.

If you extended the bottom, you could make room for an AirTag but it might be more noticeable.

If you don't have a OneUp tool, just cut the top off in your slicer.

OneUp EDC Mountain Bike Steerer Tube Plug w/ Tile Tracker

OneUp EDC Steerer Tube Plug.stl

Mount your multiboard offset with a peg. Fits M3 or M4 bolts. Most M3 bolts will need a washer.

I have some cases where the hole spacing of an offset snap isn't where I can drill into the wall or other mounting device.

Having the spacer screw in makes it easier to line up when attaching to the wall.

There is a second model with a wide base which is handy in some cases. I use it sometimes with this to mount Multiboard to GearWall: https://thangs.com/mythangs/file/1005878

Multiboard Offset Peg with Screw Hole

Multiboard Offset Peg with Screw Hole.stl

Multiboard Offset Peg with Screw Hole Wide Base.stl

Fusion 360 file with magnet size parameters. STL accepts 6x3 magnets. They fit in snug enough without falling out, but you may want to add glue.

Multiboard Long Hex Bit Holder.stl

It's been designed around the Wera stubby screwdriver but works with many others. It's designed to be effortless to remove and put back, but cannot be bumped off easily.

This also holds an LTT screwdriver fairly well too, but some modifications may be necessary for some.

Fusion 360 file attached to customize.

The bit holder is built to accept 4x2 magnets but this can easily be customized in Fusion 360. You could even go with no magnets.

Multiboard Stubby Screwdriver Holder

Wera Stubby Multiboard.stl

Wera Stubby Multiboard No Bitholder.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

j0dan

Achievements

Voyager

Seedling

Up and Coming