I

Insignia charger phone stand

by
iguanaman
Follow
Follow
Remix Model
I
iguanaman
|
Image 2 of 4
Insignia charger phone stand 3d model
I
iguanaman
|
Image 2 of 4
Insignia charger phone stand 3d model
2D
3D
Makes
Insignia charger phone stand 3d model
Insignia charger phone stand 3d model
Insignia charger phone stand 3d model
Insignia charger phone stand 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4248340.

My wife needed a phone stand for a charger she purchased (Insignia Quick Charger) so I felt none of the available entries on Thingiverse fit the bill so I made one. Works with Insignia phone charging pad (about 95mm diameter) Tested with Samsung S8+ and S10 models. I left the opening for the charger a tiny bit larger so the charging pad could easily be removed. I used tiny bits of poster putty to adhere the pad to the back of the stand but it isn't necessary. Printed with no support.

Rotate the stand (from the default model position) 90 degrees on the X axis so the base is lying on the bottom of the bed.


0 Likes0 Downloads


0 Likes0 Downloads
This model is restricted by licensing terms.