air cleaner / purifier

This device is made to clean the air in the printer enclosure or when soldering. You need: 2X 60x60x25 fan 25X M3 threaded (insert shown in photos where to insert) 8X M3x30 bolts 17X M3x10 bolts 1X switch 21x15mm size 1X 1Kohm potenciometer Activated charcoal or filter material, for charcoal you will need some fabric to keep them from spilling over. Some wires and soldering iron

Supports can be used for the bottom part where the switch is inserted. Do not forget to use cutout models to make air passages.