This part allows for temporary repair of a transmission kickdown cable that has pulled out of the metal ferrule and is making the throttle pedal sticky. Instructions: Print two up on end, place on ether side of the joint from the cable and the ferrule, slip two heavy duty cable ties on, and crank down the cable ties. Make sure to print out of something that can take the heat under the hood, like ABS or CF-PET. Warning: The goal here is to make the car safer by temporarily keeping the pedal from sticking. This is not a permanent fix. Get a new cable ordered and fix the problem. You are messing with the thing that makes the car accelerate, don't mess if you don't feel comfortable with it. I accept to liability for you making a mod to your car.