Redox Rev 2.0WHS tilted

Created based on the open case version from https://github.com/mattdibi/redox-keyboard/tree/master/redox-w/rev2.0WHS/case. This is an enclosing case with hole for the lithium charger type c. 9 degree. PCB top mount. BOM for 1 side:

• 6 M3 heat insert (4 or 5 or 6 mm is fine)
• 6 M3x6mm countersunk screws
• 5 M3x8mm flat pan head screws
• 10 M3 bolts
• 10 m3 lengthies
• Type C lithium charger PCB (https://www.amazon.com/Interface-Lithium-Charging-Protection-Function/dp/B07PZ6V937?th=1)
• 3.3v stabilizer PCB (https://www.amazon.com/DC-DC-Automatic-Regulated-Module-Charge/dp/B09L8DDNY9/ref=sr_1_3?keywords=5V+to+3.3V&qid=1703840861&sr=8-3)