This is a mount that clips into onto the top of the info screen on my 2004 Goldwing. I created this to mount an Android auto screen to my bike. I printed it in PETG

Goldwing Android Auto Mount

GoldwingInfoScreenMount.step

Lock to help keep the lid on a 6 qt Sterilite container. I use these for baby geckos and want to make sure they can't push the lid open and squeeze out.

Sterilite Lid lock.step

The "legs" on my Leggy cup holder were too easy to break with kids around. So I created something a little stronger. Fits in the cup holders that are built into my couch for wider cups or cups with handles. 

Fatter Cup Holder - Part 1.step

A 72mm tall stand for the MyVodkaMaker Mini. 

MVM Base Stand

Base Stand.step

A compartmentalized feeding bowl to separate wet and dry foods. 

Roach bowl.step

Insert for couch cup holder to allow for larger cups, mugs or bottles. 

Leggy Cup Holder.3mf

I use white dough proofing trays to raise mealworms in. I have created this item to allow me to stack my trays in the same orientation as a space saving measure. 4 of these per tray and then stack the next tray on top. 

Tray support for stacking

CornerBrace - Part 2 (1).stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4762286.

I started a small mealworm farm and purchased a set of bucket sifters (https://tinyurl.com/bucketsifter?fbclid=IwAR0Uw73IPfx9fJIBmN-wD2YZzoLlDZ18NC5Brui9aPmkMu4sZsKt_lEZRY0). They work good but the worms don't fall through the screen holes as well as they do slots. After purchasing a Pupae sifter insert from here (https://www.spacecoastmealworms.com/collections/mealworm-pupae-sifting-trays?fbclid=IwAR2tBWLnFxRK8LMWsoHI54aB7YwIJhNpfspm_S96VlwJ6hxbFiD_KQ0wWNM) I realized the slots are the way to go and as this was the only size being sold from this person I decide to fill the gap with my own inserts for the other sizes. I will not be making one with the same slot size as the link above, It works great for pupae and you can get one from him. But I will be adding other sizes for sorting mealworms by size. To start here is the 2.5mm slot one that is good for sorting medium sized and larger mealworms.

Edited: added 1.5mm, 2.0mm and 3.0mm slot widths
Edit: added same sizes as whole inserts for those with large enough print beds. Diameter is 276mm

Mealworm Sorting Insert

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4743270.

A simple battery holder for the Anker Power Core Slim 10000. Didn't see any for the slim and it was a bit cheaper when I was purchasing so I made a quick one. Mounts to the strap that goes over your head. Can still operate the adjustment wheel on the elite headstrap and fits the stock one as well. Made it to be removable without undoing the strap every time so my Quest 2 and be stored in the grey case. I use a rubber band to make sure the battery doesn't slide out but it is a snug fit. I put strap slots of both sides so you can face it in whichever direction you like. 
Edit: 2-3-21:  Added New Clip Battery Holder. Easier to put on and take off of the strap on the Quest 2. Also 2 slots for using a different strap over something thicker like a DAS.  This is the same battery holder just with a different opening for the strap.

Quest 2 Anker PowerCore Slim 10000 holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4773639.

Wanted some more coconut hides for some new baby crested geckos that recently hatched. The diameter is 100mm with an opening 50mm x 33mm and a 5mm hole at the top and bottom for hanging. This is 1/2 a coconut designed for 2 to be glued together. Printing first try as I type.
Added: full coconut if you want to try printing whole thing


Reptile Coconut Hide

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4736614.

edit: 1-30-21  Added 3mm slot box. Looking for a stackable solution for sorting mealworms by size after sifting out frass and bedding. These stack together. There is a solid bottom, 2mm slots, 2.5mm slots and 3mm slot. I plan to use these on a vibration plate to help the mealworms fall through. May have to make the lip that locks them together bigger. Will have to see after first use. Boxes are 147.5mm x 225mm x 40mm. I will be working on larger box sizes so that I can make use of the full print bed.

Stackable Mealworm Sorting Boxes

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4745631.

Got a new electric Samsung stove and the dials are on the front. We keep bumping them on and brushing against them.  This stove has 2 screws behind the knob and a small protrusion behind the know above the control sticking through so they other "Things" I found didn't fit right. So I made my own. It's 6mm thick and fits pretty snug but the wife with her fake nails can remove it easy enough. this is not a child safety lock. Its only for accidental turns.

Edit: 2-24-21 Added a holder for while the stove is in use. Kids keep knocking them off the counter and I have to hunt for them. Now they are nice and organized.

Edit 2-10-24 redesigned to be a lower profile. The older one were too thick and wore out the knobs on the stove. these are thin enough to slip in and out easy. Also created a new holder for them.

Samsung Stove Knob Safety

Stove Knob Safety

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3343020.

This is my first 3D creation. Not much but a friend needed a custom mount for his new Ring 2 Doorbell to fit between siding and trim on door frame. He is planning to sell the house in a few years and wants to be able to take the doorbell with him without modifying the house at all. Lined up the recessed mounting holes with the holes from his existing doorbell. and cut out for the wood trim piece sticking up around door (3 mm deep x 11.3 mm wide) . Made it thick enough that mounting screws for the Ring only go into this plate. Plate is 13.5 mm thick.

Edit: 1-10-19 V2 uploaded. finally got device in hand and made some tweaks to hole sizes and placement. Should work now. Friend took home a 1mm  test print to see if the holes for the original doorbell line up.  Don't see this being too popular of a thing but figured I'd share what I got.

Edit: 1-13-19 V2.1 just rotated so it lays flat on bed.
Edit: 2 today. Added V5 . Friend decided he wanted it to be above the current doorbell due to a screw in the wood trim around door being in the way.

Ring 2 Doorbell custom mounting plate

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4744095.

Was asked to modify my other battery holder to fit this model. Parametric modeling made this a fairly quick thing. Don't have one to test with so will have to see if it gets printed and see how it does. https://www.thingiverse.com/thing:4743270

Updated to V2 2-3-21: added additional strap slots for putting a strap through to go around thicker items like the DAS. Change regular strap slots for a quicker on/off. Adjusted the USB openings.

Anker PowerCore Essential 20000 Power Bank

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4767561.

Broke one of my clamp holders on the side of my booster pac https://www.northerntool.com/shop/tools/product_200647336_200647336?cm_mmc=Google-pla&utm_source=Google_PLA&utm_medium=Automotive%20%3E%20Batteries%20%26%20Chargers%20%2B%20Jump%20Starters&utm_campaign=BoosterPAC&utm_content=167764&gclid=Cj0KCQiAvbiBBhD-ARIsAGM48byZB_z6lZq6hwpt91Cp7gaW48xQAzXlMDKkmqsVrL9OEGjrF_0F8E8aAgoIEALw_wcB&gclsrc=aw.ds
I didn't make it as long as the original as I don't feel its needed.

Booster Pac Clamp Storage replacement

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4939846.

The cage for my daughters rat has narrow horizontal wire bars. It came with a big spring to hold the water bottle against the bars but she can't work it with the tension on the spring enough to hold the bottle in place so I designed a bottle holder that clips on the cage.
The file I shared is for a bottle that is 131mm tall, has a 51mm diameter, Cap with a 51mm diameter going on a cage with a vertical wire spacing of 10mm and a horizontal spacing of 122mm. The FreeCad file is also shared and Parametric so you can customize the size. I'm no good with Scad so can't make a "thingiverse customizable" part.

Small Animal Water Bottle Holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

gunkleneil

Achievements

Seedling

Trailblazer

Debutant