This is my second version of my filament storage. It is about as good as you can get when it comes to looks and reliability. It works on literally everything; Refill boxes, Spools, Spools in Bags, Spool Boxes, the list goes on... This print profile is about as close as I can get it to printing reliably and being as cheap as possible (by making the print have 2 walls it makes it feel even more premium, but it costs significantly more). I spent way too much time prototyping this project and spools of filament than I would've liked, but I believe the end result is worth it. I have put about 30 hours into this project and have 100 hours of experience from my first design, so this one should be perfect!

My Recommended Print Settings are: 0.25MM Layer Thickness 1 Wall with Arachne Wall Generation 5% Gyroid Infill NO SUPPORT NEEDED! This file allows for your printer to print without support! If you are using a bed slinger printer, then orient the storage where the long side is perpendicular to the way the build plate moves.