These tiles are designet to add som depth and shadows, some texture and style for a backdrop. But you can use them however you like. Put side-by-side to fill up an entire part of the wall, or more seperated. No matter how you end up doing it - please share you make! The more makes, the more inspiration for fellow creators!
Sizes The tile comes in 3 types: 50, 75 and 100mm. These can of course all be scaled up and down to fit your exact needs!
But be aware that the lower the above number is, the more pointy the tile is. (This is because they are all 15 mm deep, so the larger the tile, the lower the angle between the sides gets.)
Types
All sizes comes in 3 versions. Fx. 50, 50A and 50B. This means:
Without a letter: complete tile! A-version: 1 side of the tile B-version: 1 side of the tile (opposite/mirror of A) If you want them stacked front a desk and up, you need to print complete tiles and either A or B tiles (you will only need A or B - not both!)
Assembly
- Print a lot of tiles!
- Attach them to the wall with a some kind of glue/double sided tape or similar.
Print instructions These tips can maybe help to reduce the amount of filament
- Orientation: Standing. (Might seem odd, but it makes it possible to skip infill → saves time and filament!)
- Speed on first layer: 50% (To ensure good bed adhesion for the standing tiles)
- Supports: NO supports needed
- Infill: 0% (not needed if placed on the side)
- Perimeters: 1
Happy printing!
Want to show your support? You can see my other designs here on Printables - and you can become an active supporter. I would really appreciate it! https://www.printables.com/@GlennovitS3D