A coral inspired bowl for whatever is just flying around and needs a proper storage location.
Scaling / size
- Upscaling (100% +): as big as you want
- Regular size (100%): 200 x 200 x38 mm
- Smaller (80%): 160 x 160 x 30mm
- Small (60%): 120 x 120 x 23 mm
- I would not scale it down below 40%
Print settings Material usage (100% scale): 200g Print time: (100% scale): 17h
Material usage (80% scale):120g Print time: (80% scale): 11h
Material usage (60% scale): 60g Print time: (60% scale): 5h
Material: PLA Print direction: stl is rotated correctly Support: none Outer walls: 3 Infill: 15% Build plate adhesion type: none
Categories:
30 Likes61 DownloadsJune 14, 2023