A beautiful trash can suitable for your home, office and especially bathroom. The container can be used with or without the print-in-place swing lid. The shape is inspired by old videogames where the resolution did sometimes not fully load.
Included versions: A: Regular
- Body_regular: The body with 230mm height (default)
- Body_regular_vasemode: the body to print in vase mode
- Lid_regular: the Lid – print-in-place (default and recommended)
- Lid_regular_seperated_1 and - - Lid_regular_seperated_2: Both parts separated – print them this way if your printer tends to mess up gaps - to join them just bend the ring a little and insert the lid
Size assembled: 210 x 192 x 255 mm Volume: 5 Liters
B: Small
- Body_small: The body
- Body_small_vasemode: the body to print in vase mode
- Lid_small: the Lid – print-in-place (default and recommended)
- Lid_small_seperated_1 and - Lid_small_seperated_2: Both parts separated – print them this way if your printer tends to mess up gaps - to join them just bend the ring a little and insert the lid
Size assembled ca: 138 x 120 x 163 mm Volume: 1 Liter
This is the V3
Print settings Material usage regular: Body 250g; Lid 150g Print time regular: Body 15h; Lid 10h
Material usage small: Body 100g; Lid 80g Print time small: Body 6h; Lid 5h
Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 20% Build plate adhesion type: none