A quick and easy toilet paper holder. The design is print-in-place and uses very little material.
Instructions:
- Print the thing
- Glue it on the wall with 3M tape or wall mount glue.
Print settings Required build volume: 130 x 160 mm Material usage: 35g Print time: 2h – 3h
Material: PLA Print direction: stl is rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 5 Infill: 30% Build plate adhesion type: none
Categories:
10 Likes37 DownloadsJune 5, 2023